|
 |
| MCR-AF |
 |
| Specifications |
| Width Between Columns |
mm (in) |
2,600 (102.36) |
| Table Travel (X Axis) |
mm (in) |
2,600 (102.36) |
| Spindle Range |
min-1 |
30~8,000 [12,000, 15,000, 25,000 opt.] |
| Spindle Power |
kW (hp) |
26/22 (35/30) (10 min/cont) [20/15 (27/20) (10 min/ cont.), 15/11 (20/15) (10 min/ cont.)] |
| Rapid Traverse Rate X/Y/Z |
m/min (ipm) |
20,000 (787)/20,000 (787)/10,000 (394) |
| Magazine Capacity |
|
24 (32 opt.) |
|
|
 |
| MCR-BII |
|
| Specifications |
| Width Between Columns |
mm (in) |
20E:2,100 (82.68), 25E:2,600 (102.05), 30E:3,100(122.05), 35E:3,500 (137.79) |
| Table Travel (X Axis) |
mm (in) |
20E:[20x30:3,000 (118,11), 20x40:4,000 (157.48), 20x50:5,000 (196.85)], 25E[25x40;4,000 (157.48), 25x50:5,000 (196.85), 25x65:6,500], 30E[30x50:5,000 (196.85), 30x65:6,500 (255.91), 30x80:8,000 (314,96), 30x100:10,000 (393.70)], 35E[35x50:5,000 (196.85), 35x65:6,500 (255.91), 35x80:8,000 (314.96), 35x100:10,000 (393.70)] |
| Spindle Range |
min-1 |
4,000 (6,000 optional) |
| Spindle Power |
kW (hp) |
30 / 22 (40 / 30) |
| Rapid Traverse Rate X/Y/Z |
mm (in)/min |
20E:15,000 (590.55)/20,000 (787)/10,000 (393.70), 25E,30E,35E:15,000 (590.55)/15,000 (591)/10,000 (393.70) |
| Magazine Capacity |
|
50 Pocket (70, 100, 120, 180 optional) |
|
|
|
 |
| MCR-A5C |
|
| Specifications |
| Width Between Columns |
mm (in) |
2,050 (80.71) |
| Table Travel (X Axis) |
mm (in) |
20x30, 25x30:3,200 (125.98), 20x40, 25x40:4,200 (165.35), 20x50, 25x50:5,200 (204.72) |
| Spindle Range |
min-1 |
30~4,000 [30~6,000 & 30~8,000 opt] |
| Spindle Power |
kW (hp) |
22/18.5 (30/25) (30 min/ cont) |
| Rapid Traverse Rate |
mm/min (ipm) |
X, Y:20,000 (787.4) Z:10,000 (393.7) |
| Magazine Capacity |
|
50 [OPT: 72, 100, 120, 180] |
|
|
 |
| MCR-A |
|
| Specifications |
| Width Between Columns |
mm (in) |
20E:2,050 (80.71), 25E:2,550 (100.39) |
| Table Travel (X Axis) |
mm (in) |
20E[20x30:3,200 (125.98), 20x40:4,200 (165.35), 20x50:5,200 (204.72)], 25E[25x30:3,000 (118.11), 25x40:4,000 (157.48), 25x50:5,000 (195.86)] |
| Spindle Range |
min-1 |
4,000 (6,000 & 8,000 Optional) |
| Spindle Power |
kW (hp) |
26 / 22 (35 / 30) |
| Rapid Traverse Rate X/Y/Z |
mm (in)/min |
20,000 (787)/20,000 (787)/10,000 (393.70) |
| Magazine Capacity |
|
32 (50, 70, 100, 120, 180 opt.) |
|
|
|
|
